Use these photos to do an inventory of your parts to make certain that
you have a complete parts set. The photos are courtesy
of Laminatrap. They were in the archives of the old site. I reworked the bottom
photo a bit to organize it for this page.
1. Booster/barrel bearing
2. Barrel jacket
3. Trunnion
4. Barrel
5. Sight base & sight
7. Top plate
8. Scope base plate
9. Extractor
10. Left side plate
12. Bolt
13. Lock frame
14. Barrel extension
15. Bottom plate
2. front cartridge stop
3. Breech lock cam
4. Trunnion bushing & ring
5. Trunnion bushing spacer
7. Top Plate
8. Rear sight bolt
9. Trigger bar pin
10. Trigger bar
11. Cocking block
18. Belt holding pawl & cartridge stop pins
19. Driving spring
20. Scope base plate
21. Spline - trunnion/side plate
(2 required)
13. a. Front sight, b. screw, c. detent plunger, c. spring
14. Belt holding pawl & spring
15. Top cover pin
16. Top cover detent & spring
